USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

UK Made Engine Stands

221-10 Series

Tired of your engine flopping around on the workbench as you assemble the top end, gearbox, timing cover, and primary drive?

Don't wait until you have an engine unit land on your toes, get the correct BCS engine stand, and hum happily away as you sit down and work away carefully, without having to worry about flying engines.

These heavy duty UK made professional shop tools are fabricated from square section steel, and designed to hold the engine unit securely in any bench vice. They come with a 7/8" round "handlebar" section to allow temporary attachment of a clutch lever so clutch spring tension can carefully be set up on the bench. Supplied painted and ready to go.

Please note, due to slight manufacturing variations, some minor filing may sometimes be required for easy "drop-on" fitment of engine cases to these stands.

Hints and tips: The trick with these stands is either to clamp them into your bench vice, which I assume is bolted firmly to a solid work bench, and you can then move it into a variety of directions by clamping it into different positions.

I have a bench vice that rotates on its base, but if you prefer, you could alternatively drill a hole in the lower portion of the stand and through the bench and mount it to the bench with a large diameter pivot bolt with two nuts tightened together to hold it almost tight, so with some light force you can rotate the stand on top of the bench without it wobbling.

The round section is to clamp a clutch lever to, for even adjusting of the clutch spring.

221-10/A ENGINE STAND, UNIT 650/750 TRIUMPH
221-10/B ENGINE STAND, UNIT 350/500 TRIUMPH
221-10/C ENGINE STAND, A50/65 BSA
221-10/D ENGINE STAND, UNIT SINGLES TRIUMPH/BSA
221-10/E ENGINE STAND, NORTON TWINS
221-10/F ENGINE STAND, BSA A7/10

#221-10/A ENGINE STAND, UNIT 650/750 TRIUMPH


#221-10/B ENGINE STAND, UNIT 350/500 TRIUMPH


#221-10/C ENGINE STAND, A50/65 BSA


#221-10/D ENGINE STAND, UNIT SINGLES TRIUMPH/BSA


#221-10/E ENGINE STAND, NORTON TWINS


#221-10/F ENGINE STAND, BSA A7/10


Side view of 221-10/E